Watercooling has previously been for the most advanced system modders and PC enthusiasts. Placing a water cooling kit in your computer is most commonly done to achieve one of two things:
1. Cool down an excessive heat source.
2. Make your computer system quiet.
The Innovatek system is designed to fullfil both of these purposes, and accomplish each with great success. Not all systems are created equal as anyone who has used more than one air cooling heatsink can tell you, some cool better than others. This premise holds equally true for watercooling systems. Lets take a look at the kit.
This system was provided to me by Scott from www.HighSpeedPC.com and a high five has to go out to him for his amazing service. The system consists of three main elements; the pump, the water block, and the heat-exchanger or radiator. The pump is used to circulate the water through the system from the water block, to the radiator, and then to be circulated back to the water block again.
The Innovatek Water Cooling Kit should arrive with all of the following:
(1) Mono Radiator with blue end caps
(1) Eheim Pump with accessories
(10) Feet of 3/8" OD PVC tubing
(1) 120mm fan with mounting hardware
(1) Finger guard with mounting hardware
(1) 3 to 4 pin Molex power adaptor
(1) Innovatek Reservoir block w/plastic yellow fill cap
(1) Innovatek Water block with clamp
As you can see from the picture above, the kit is packaged extremely well. The box didn’t arrive packed with newspaper or cardboard, instead components were individually bubble wrapped and then packed in a sturdy box with foam peanuts.
